High Speed Sortation - ProSort 400 Elite Series

Hytrol's ProSort 400 Elite family of sorters is specifically designed to handle high-speed applications. The ProSort 421 is designed to sort products at a 22-degree angle where high speeds are required. With the ProSort 421, speeds of 700 FPM are possible. The ProSort 431 is designed to sort products at a 30-degree angle where close divert centers are required. With this model, speeds of 350 FPM are possible. The ProSort 421 & 431 series is offered as single-sided, diverting from either side.

Read more about Hytrol's ProSort 400 Elite Series »
Century Conveyor has partnered with DirectCapital to provide equipment financing. Click to find out more!
Give us a call at 908-205-0625
Material Handling System Solution Specialists

CaseStudies

Recycle, Inc.
SIC: 4953 - Full-function industrial container management

Conveyor system automates container handling operation

Recycle Image 1
Incoming containers are loaded onto four takeaway conveyors for transport to processing workstations. Steel, polyethylene, and fibre containers are all visible in the receiving area.

When Recycle Inc. had the opportunity to design a new container processing plant from the ground up, an automated conveyor system was high on the list of priorities. Company managers wanted to replace a largely manual handling operation with a conveyor-based approach that would be both more efficient and safer.

Based on the new facility's first few months of operation, they were right. Employee productivity climbed 20% just in the first week of start-up. Throughput projections predict that the new plant will process four times as much material as the old plant did in the same amount of time and with the same number of employees.

Jeffrey Bey, President of Recycle Inc., cites several reasons behind his company's decision to switch to automated handling. "Essentially what we are is a manufacturing operation," Bey explains. "We use one process to wash and prepare containers that will be reused, and another process to shred or granulate containers that are to be destroyed.

"Our incoming 'raw materials' are the containers themselves. These containers — especially the larger ones — tend to be unwieldy, and some of them are fairly heavy. In the past, we handled the containers manually at a number of points during processing. Given our throughput requirements, we had the potential for accidents, and our approach wasn't very efficient. As demand for our services escalated, we knew that we needed to come up with a completely new way of handling containers — one that would take advantage of the benefits offered by automation."

After the company located a suitable building for a new facility in South Plainfield, New Jersey, Bey assembled a project team to study new materials handling methods. The team contacted several nearby conveyor distributors for design ideas. According to Bey, some distributors balked at the idea of getting involved in up-front design work without first being assured that they would get the job.

"We were looking for ideas," says Bey, "and we were also looking for a distributor and a conveyor manufacturer that would partner with us on this project." Fortunately, the local Hytrol Conveyor distributor, South Plainfield-based Century Conveyor, didn't hesitate to tackle the project.

Working closely with the project team, representatives from Century Conveyor, from Hytrol, and from a nearby automation firm designed a conveyor system that combines powered conveyors with smart sensors and custom software. At every decision-point in the system, sensors supply feedback to the control program on the movement of individual containers, on the performance of the conveyors, and even on the maintenance requirements of the sensors themselves.

A Whole New Approach

Recycle Image 2
The company's switch to automated conveyor systems has produced a much higher throughput capacity without requiring an increase in the workforce.

At the company's old processing facility, employees did a lot of the handling of incoming containers. The plant did have a conveyor system in place, but it was a single straight-line design that simply transported the containers from one workstation to the next. The old conveyor system did not include any powered transfers or spurs.

The design of the new conveyor system at the South Plainfield facility greatly reduces the amount of manual handling by relying on automated conveyors to move the containers.

The new plant inspects and cleans 5- to 85-gallon polyethylene containers and intermediate bulk containers (IBCs) for reuse. In addition, it also provides certified destruction of 5- to 85-gallon polyethylene, steel, and fibre containers, and of IBCs.

Incoming containers are transferred from trucks to one of four takeaway conveyor lines. Based on their composition, disposition and on whether they will be prepared for reuse, the containers are carried by the conveyors to several possible destinations.

Containers that are to be reused are conveyed to an inspection loop where employees evaluate their condition. Powered roller conveyors then carry the containers that have passed inspection to one of three fully-automated washing stations. After washing and another inspection, the containers are ready to be returned to their owners for reuse. All of these containers are captive within a closed-loop system between their owners, customers, and the South Plainfield plant.

Recycle Image 3
Powered transfers eliminate much of the manual handling that was required in the company's old facility. A multi-level conveyor layout optimizes the use of the building's 86,500 square feet of floor space.

Containers that are slated to be destroyed are conveyed to other workstations within the building for processing. In this part of its operation, the facility handles containers made of steel, polyethylene, or fibre.

Conveyors carry steel containers to a shredder; the scrap metal that is generated goes to electric mini-mills to be made into reinforcing rods for use in concrete construction projects. Polyethylene containers are ground into pellets which are then sold to be made into various corrugated plastic products including plastic drums. The fibre containers are conveyed to a workstation where they are broken down prior to being supplied to a paper mill for recycling.

With the exception of the belt conveyors that carry materials to waiting trailers, nearly all of the conveyors used in the new system are powered roller. Strategically-placed accumulation sections control the grouping of the containers prior to being transferred to workstation infeed conveyors. At two points, powered turntables rotate the containers 180 degrees (see drawing).

"This new system is enabling us to process 80,000 containers per month with almost no manual handling," notes Bey, "and it has the capacity to handle a lot more. So in addition to being far more efficient and having a much greater throughput capacity, we now also have a facility that's substantially safer for our employees."

Recycle Inc.'s new 86,500 sq. ft. processing center

Incoming containers are loaded onto four takeaway conveyors in the receiving area. The containers are conveyed either to inspection and washing, or to shredding or granulating. The containers that are to be reused are delivered to their owners after being washed; materials from destroyed containers are hauled to recyclers to be made into other products.

The new facility at a glance

Company: Recycle Inc.
Location: South Plainfield, N.J.
Nature of operation: full-function industrial container management
Services provided: container inspection, cleaning, dedicated reuse, certified destruction
Total square feet: 86,500
Number of employees: 70 (company-wide)
Types of containers handled: 5- to 85-gallon polyethylene containers; intermediate bulk containers (IBCs)
Types of containers destroyed: 5- to 85-gallon polyethylene, steel, and fibre containers; IBCs
Number of containers processed per month: 80,000
Design conveyor throughput rate: 10 drums per minute
Maximum daily throughput: 6,000 Accumulation sections: Chain driven live roller
Conveyor supplier: Hytrol Conveyor Company, Inc.-Jonesboro, Arkansas
Equipment distributor: Century Conveyor Service, Inc.-South Plainfield, N.J.

Return to Case Study Listing


Century Conveyor Service, Inc. Home Page Search Our Site Privacy Policy